 |  |  |  |
 |  |  |
 |
 |
 |
 |
- Expand your X10 Wireless Remote Control System
- Glare on the TV screen? Dim the lights without interrupting your shows
- Left the garage light on? Turn it off without stepping outside
- Control devices from other rooms — no line of sight needed
 |
 |
 |
 |
Control your lights and appliances all around your house without leaving your sofa! Just plug the base of the
Wireless Remote Control System into any nearby outlet, and you'll have total wireless control of any device
connected to an X10 module or switch. The remote control operates as many as 16 devices (or groups of
devices) and includes dimming and brightening buttons for use with dimmable lights. The plug-in base receives
the commands and instantly sends them along the home's power lines. The system uses radio frequency
signals intead of infrared, so you won't have to be in direct line of sight for proper operation. As long as the
remote is within 100 feet of the plug-in base, it will work like a charm! The handheld wireless controller requires
4 AAA batteries, which are sold separately.
 |
 |
 |
 |
- Sends motion activated signals to 4 X10 addresses
- Sends dusk activated signals to 4 X10 addresses
- Turn on lights all over your home when motion is detected in one area
- Use with a chime module as an automatic doorbell
 |
 |
 |
 |
signals to 8 addresses. The first 4 addresses can be set to go on when motion is detected and off after an
adjustable time interval. The second 4 addresses can be set to turn on the X10 floodlights when it's dark
and then turn them off at dawn. The X10 Motion Detector Floodlight's photocell with adjustable sensitivity
detects light level. The adjustable passive infrared sensor with 110° coverage detects motion within a 40
foot range. Requires two 150 watt incandescent, fluorescent, or halogen floodlight bulbs (sold separately).
becoming a Home
Automation
products dealer?
Download and complete our
Dealer Application and
return it to us by snail-mail,
e-mail or by fax.
Dealer Application
Operates three X10 modules by transmitting an RF signal to an X10 base transceiver ( PAT01 )The fourth
button provides intensity control for the last device operated. Mounts simply and easily with self-adhesive
tape. Lithium battery included.
When you see a signal increase upon unplugging a device, then you
have detected an offending device. Now all that you have to do is
purchase an XPPF plug in filter. The XPPF is plugged into the wall
where the offending device was plugged in and then plug the device
into the XPPF. The X10 signal will now pass freely thoughout the
electrical system without the noise, blocked by the XPPF, passing
onto the power line.
