 |  |  |  |
 | |  | |  | |  | |  |
 |
 |
 |
 |
 | |  | |  |
Use as many of these as needed when the
wall, for any reason, is too thick causing the
mounting plate and finished plate to not
meet. Longer screws will be needed as well.
It adds 3/4 of an inch to the coverplate. If that
is too much you can cut to size.
DIAMETERS: Large end inner is 1 5/8", outer
is 1 7/8". Small end inner is 1 1/2", outer is 1
5/8".
 |
 |
 |
 |
 |
 |
 |
 |
Part#613A
Valve fits into PVC Vacuum Pipe Connectors
such as a coupling or 90-degree elbow (1
11/16 OD, and 1 3/8" ID). The opening for the
hose to go into is 1.5 inches ID, and the
widest diagonal section is 2.5 inches OD.
Low voltage wire is ran from the valve to the
low voltage leads any central vacuum. Now
the on/off switch on the end of the vacuum
hose will work!
 |
 |
 |
 |
becoming a Home
Automation
products dealer?
Download and complete our
Dealer Application and
return it to us by snail-mail,
e-mail or by fax.
Dealer Application
Part#651BMB
Low voltage connections only. There are two
metal contact points inside the hole of the
valve.
Can be installed to open up or down. All
rectangle valves on this page are
interchangeable. Outer dimensions: 3 1/8" by
4 7/8".
Part#651BMC
Contains low voltage connections only. There
are two metal contact points inside the hole
of the valve.
Can be installed to open up or down. All
rectangle valves on this page are
interchangeable. Outer dimensions: 3 1/8" by
4 7/8".
Central Vacuum
Booklet
for All Brands
"How to Get the Most Out of
Your Central Vacuum"
covers dozens of
accessories, upgrades, and
maintenance items for
every central vacuum, and
has an extensive
troubleshooting guide that
can save you $100's in
service costs.
Part#651BMS
Contains low voltage connections only. There
are two metal contact points inside the hole
of the valve. Metal inlets are recommended
for decoration, outdoors, or in the floor.
Can be installed to open up or down. All
rectangle valves on this page are
interchangeable. Outer dimensions: 3 1/8" by
4 7/8".
Part#651BMW
Contains low voltage connections only. There
are two metal contact points inside the hole
of the valve. Metal inlets are recommended
for decoration, outdoors, or in the floor.
Can be installed to open up or down. All
rectangle valves on this page are
interchangeable. Outer dimensions: 3 1/8" by
4 7/8".
Part#651HW
Contains low voltage connections only. There
are two metal contact points inside the hole
of the valve. If you need a case of these inlets
enter 24.
Can be installed to open up or down. All
rectangle valves on this page are
interchangeable. Outer dimensions: 3 1/8" by
4 7/8". HM-1500. Replaces HAYDEN MFG
1500
Square Door, PVC
Part#652HW
Vacuum valve outlet cover faceplate contains
low voltage connections. There are two metal
contact points inside the hole of the valve. If
you need a case of these inlets enter 24. Can
be installed to open up or down. Outer
dimensions: 3 1/8" by 4 7/8". HM-1700.
Replaces HAYDEN MFG 1700
